IC-C-CNA032D127 LED Backlight Strips: Replacement Guide
IC-C-CNA032D127 LED Backlight Strips: Replacement Guide
If your TV has sound but the picture remains dark, the backlight may need diagnosis. The IC-C-CNA032D127 LED backlight strips are a possible replacement set after confirming the fault. Checking your original parts helps prevent ordering the wrong configuration.
View IC-C-CNA032D127 LED backlight strips at GuuYebe

What Is This Replacement Set?
This GuuYebe replacement LED backlight set is listed for select Quasar and Sceptre LED/LCD televisions using the IC-C-CNA032D127 backlight assembly. The supplied product references include SQ3200 , X325BV-FMDR and X325BV-FMQC . Before ordering, compare the original printed IC-C-CNA032D127 number, 570 mm strip length, 10-LED layout, connector and mounting positions with the original assembly.
Review the supplier-provided specifications below. Any voltage stated per LED applies to an individual diode, not automatically to the full light bar. Where a source states L+R or A+B, check whether its measurement and LED count describe a combination rather than one separate segment.
- Strip length: 22.44 in (570 mm)
- LED count: 10 LED beads per strip
- Individual LED voltage: 3 V per bead
- Package includes: 1 set = 2 LED backlight strips

Compatible TV Models and Part Numbers
The dedicated compatibility file lists 3 exact TV model records : Quasar SQ3200 , Sceptre X325BV-FMDR and Sceptre X325BV-FMQC . No version codes were supplied for these records.
Fitment matters: A TV model match alone does not prove that the internal backlight assembly matches. Verify the complete TV model and production version, board markings, connector orientation, LED arrangement, physical length and mounting locations before buying.
Important fitment check: Exact TV fitment below is based only on the dedicated compatibility file. The broader product-content source also repeats IC-C-CNA032D127 / SQ3200 / X325BV-FMDR / X325BV-FMQC as product and search references. Compare the complete rear-label TV model, original IC-C-CNA032D127 marking, 570 mm strip length, 10-LED layout, connector and mounting positions before ordering. “Not specified” means no version was supplied in the compatibility source; it does not mean every production version is confirmed compatible.
If your original part differs, email photos of its markings and the TV rear label to [email protected] for fitment assistance.

TV Has Sound but No Picture?
With the television fully assembled and operating, shining a flashlight at an angle across the dark screen may reveal a faint image. That can suggest missing backlight illumination, but does not prove that the LED strips are defective. The LED driver, power supply or panel may also need testing. Read the TV Has Sound but No Picture guide for troubleshooting context.
Disconnect power before disassembly. LCD panels are fragile and internal circuits can be hazardous; use professional repair assistance where appropriate.
Frequently Asked Questions
Is this kit compatible with every TV sharing the same model family?
No. Compare the original strip markings, connector, mounting points and production revision before ordering.
Does per-LED voltage describe the entire strip?
No. Per-LED voltage is an individual component specification and should not be used as the full strip supply voltage.
Can the LED strips be cut or modified to fit?
Use the exact physical layout specified for your TV. Do not cut or modify a replacement strip unless its manufacturer explicitly provides that procedure.
Where to Buy IC-C-CNA032D127 LED Backlight Strips
Once the backlight fault and the original assembly match are confirmed, review the latest photos, package contents and compatibility details on the product listing.
Check fitment and buy IC-C-CNA032D127 LED backlight strips at GuuYebe