SVH700A31 LED Backlight Strips: Replacement Guide
SVH700A31 LED Backlight Strips: Replacement Guide
If your TV has sound but the picture remains dark, the backlight may need diagnosis. The SVH700A31 LED backlight strips are a possible replacement set after confirming the fault. Checking your original parts helps prevent ordering the wrong configuration.
View SVH700A31 LED backlight strips at GuuYebe

What Is This Replacement Set?
This GuuYebe replacement LED backlight set is listed for select Hisense 70-inch LED/LCD televisions using the SVH700A31 backlight family. Supplied identification references include HD700X1U91-L1 and CRH-BX70X1U913030T080902H-REV1.2 . Before ordering, compare the original printed references, 683 mm strip length, 9-LED layout, connector, mounting positions, TV model and panel reference.
Review the supplier-provided specifications below. Any voltage stated per LED applies to an individual diode, not automatically to the full light bar. Where a source states L+R or A+B, check whether its measurement and LED count describe a combination rather than one separate segment.
- Strip length: 683 mm
- LED count: 9 LED beads per strip
- Individual LED voltage: 3 V per bead
- Package includes: 1 set = 8 LED backlight strips

Compatible TV Models and Part Numbers
The dedicated compatibility file lists 5 exact Hisense model records : 70H6570G , 70A6G , 70A6G3 , 70A6H and 70A61G . No version codes were supplied for these exact records.
Fitment matters: A TV model match alone does not prove that the internal backlight assembly matches. Verify the complete TV model and production version, board markings, connector orientation, LED arrangement, physical length and mounting locations before buying.
Important fitment check: The broader product-content source also references HD700X1U91-L1 and CRH-BX70X1U913030T080902H-REV1.2 . These are useful identification references, but exact TV fitment is based only on the dedicated compatibility file above. The same TV model may use different backlight assemblies in different production runs. Compare the original SVH700A31 or other printed references, 683 mm strip length, 9-LED layout, connector, mounting positions and panel number before ordering. “Not specified” means no version was supplied in the compatibility source; it does not mean every production version is confirmed compatible.
If your original part differs, email photos of its markings and the TV rear label to [email protected] for fitment assistance.

TV Has Sound but No Picture?
With the television fully assembled and operating, shining a flashlight at an angle across the dark screen may reveal a faint image. That can suggest missing backlight illumination, but does not prove that the LED strips are defective. The LED driver, power supply or panel may also need testing. Read the TV Has Sound but No Picture guide for troubleshooting context.
Disconnect power before disassembly. LCD panels are fragile and internal circuits can be hazardous; use professional repair assistance where appropriate.
Frequently Asked Questions
Is this kit compatible with every TV sharing the same model family?
No. Compare the original strip markings, connector, mounting points and production revision before ordering.
Does per-LED voltage describe the entire strip?
No. Per-LED voltage is an individual component specification and should not be used as the full strip supply voltage.
Can the LED strips be cut or modified to fit?
Use the exact physical layout specified for your TV. Do not cut or modify a replacement strip unless its manufacturer explicitly provides that procedure.
Where to Buy SVH700A31 LED Backlight Strips
Once the backlight fault and the original assembly match are confirmed, review the latest photos, package contents and compatibility details on the product listing.
Check fitment and buy SVH700A31 LED backlight strips at GuuYebe